Eneo DIR-4108H Series Operating Instructions Manual page 44

Operating Instructions
You also can narrow your event search by selecting Option... and setting up new search conditions.
From: Pressing the
When set to On, the search will be from the first recorded image.
To: Pressing the
When set to On, the search will be to the last recorded image.
Type: Select between Motion Search and Museum Search. Motion Search detects motion in the defined area.
Museum Search detects if a defined object has moved.
Zone: Press the
On and Off to define the area of the picture in which you want to search for motion. The zone should be placed or
focused on the centre or, at least, within the outline of targeted object.
NOTE: Defining the area of the image in which you want to search for motion is nearly identical to setting up
the DVR for Motion Detection. Please refer to the Motion Event Settings section in Chapter 2 — Installation &
Configuration – Main Setup, Event Setup for more detailed instructions on setting up the detection blocks.
NOTE: When setting the Museum Search Zone, the zone should be placed inside of the border line of the target
object. If the selected block is placed on the border line, the sensitivity of the Museum Search may decrease.
Sensitivity: Select the sensitivity from 1 (low sensitivity) to 5 (high sensitivity).
Min. Blocks: Set the number of sensor blocks that must be activated. Setting the Min Blocks will only be available
if Motion Search is selected in the Type field.
Once you set your desired search conditions, select Search and press the
Motion Search screen. Selecting Cancel exits the screen without saving the changes.
When you search for motion events for another camera, you will be asked whether or not you want to delete the previous
search results from the list.
Text-In Search
The DVR maintains a log of each time there is Text Input. The Text-In Search screen displays this list. Use the arrow
buttons to highlight the event for which you would like to see video.
42
button toggles between On and Off. When set to Off, you can enter a specific Date and Time.
button to toggles between On and Off. When set to Off, you can enter a specific Date and Time.
button, and an image from the video appears with a grid overlay. You can turn sensor blocks
button to display the search results in the