Motion Search - Eneo DIR-4108H Series Operating Instructions Manual

Selecting or located at the bottom zooms the record table. Selecting
selecting displays 24 hours (3-minute based) at once. To move to earlier or later times that are not shown in the current
record table screen, select the arrows located at the end of the times by using the arrow buttons on the remote control.
NOTE: If the DVR has images recorded in more than one recording mode in the same time range, the recording
status bar displays recording information in the following priority order: Pre-Event
of the bar indicates different recording modes: Yellow for Pre-Event, Purple for Event, and Blue for Time.
Selecting located at the bottom displays the Calendar Search screen.
Selecting located at the bottom displays the Search menu.
Selecting in the top-left corner exits the Record Table Search screen.

Motion Search

Motion Search can be selected from the Search Filter menu while the DVR displays the camera full screen. The Motion
Search screen displays a list of motion events. Use the arrow buttons to highlight the event for which you would like
to see video and press the
Selecting Close and pressing the
image of the event. Pressing the
If you want to return to live monitoring, press the MENU button on the remote control and select the
top of the screen.
Days with recorded video display on the calendar with white numbers. You can
select the days with recorded video by using the arrow buttons on the remote control.
Once you have selected a day, pressing the
image of the selected date on the screen. Once you have selected the date you
want to search, review the surrounding video by using the playback controls located
at the bottom. Refer to the Recording Video – Playing Recorded Video section
of this chapter for information regarding playback controls.
Go To: Displays the first or last recorded image, or searches by date and time (see below for
more details).
Clip-Copy: Copies a video segment and saves it (see below for more details).
Zoom: Zooms the current playback image.
Enable De-Interlace: Turns the de-interlace filter on (see below for more details).
Slow Play: Plays video at low speed (x1/2, x1/3, x1/4, x1/6 and x1/8).
button to display the video associated with the selected event in the small search screen.
button will extract the video associated with the Motion event and display the first
(Play) button on the remote control button will start playing the "event" video segment.
Digital Video Recorder
displays eight hours (1-minute based), and
Event
button displays the first recorded
Time. The color
(Exit) icon at the
41