Pre-Event; Event Setup; Alarm-In; Figure 44 - Pre-Event Setup Screen - Eneo DLR4B-08/500DV Operating Instructions Manual

Pre-Event

Highlight Pre-Event in the Record menu and press the
not have Event set up in the Record Schedule, a message will display alerting you to this fact.
Figure 44 — Pre-Event setup screen.
NOTE: When the DVR is in the Time or Time & Event mode, it ignores the pre-event settings and follows the
time settings.

Event Setup

Alarm-In

Highlight Alarm-In in the Event menu and press the
Figure 46 — Alarm-In Settings screen.
button, and the Pre-Event setup screen appears. If you do
When the DVR is in the Event Record mode it is possible to
have it record images before the event occurs. The Pre-Event
screen allows you to define how to handle pre-event recording.
You can turn individual cameras On or Off for pre-event
recording. The image speed can be set from 1.00 to 30.00 ips
(25.00 ips PAL), image quality can be selectable from Very
High, High, Standard and Basic, and image resolution can
be selectable from Very High (D1), High (Half D1) and
Standard (CIF).
You can set the amount of time to record prior to the event
by adjusting the Dwell. You can set the Dwell from 5 seconds
to 30 minutes. The longer the dwell set, the fewer maximum
ips can be set.
Figure 45 — Event menu.
button. The Alarm-In setup screen appears.
The alarm terminal strip on the back of the DVR has inputs
associated with each alarm. You can set up each input on the
Alarm-In screen. You can turn each input On or Off by
highlighting the alarm number and pressing the
Each input can be given a title. Highlight the desired Title
box and press the
allowing you to enter a title name.
Each input can be set as NO (normally open) or NC (normally
closed).
Digital Video Recorder
button. A virtual keyboard appears
button.
35