Record Setup - Eneo DIR-4108H Series Operating Instructions Manual

Disk Bad – Displays the damage status of the storage drive. (Not Formatted (The device is not formatted), Good (%) (The
device is working properly though some portion (%) of the storage is damaged.) or Bad (More than 90% of
the storage is damaged.))
Temperature – Displays the temperature of the storage drive. (N/A (The DVR cannot read the temperature.), Good (The
temperature is normal.) or Bad (The temperature is 70
S.M.A.R.T. – Displays S.M.A.R.T. information of the storage. (Good (The storage condition is normal.), Bad (Data cannot
be written on or read from the storage drive.) or N/A (The S.M.A.R.T. monitoring is not working or supported.))
NOTE: When the S.M.A.R.T. displays Bad, the screen displays a message box. Once the message box appears,
replacing the hard disk drive is recommended, usually within 24 hours.
Information: Displays whether the device is being used or not. "Other" indicates the device has been used for
another DVR. Selecting the column for the desired device displays the time information about recorded data.
Format: Displays whether the device is used for recording (Record) or not (Not Using). Selecting the column for
the desired device allows you to format the device for recording. When selecting Use As – Not Using and then
Format, the device will not be used for recording.
Recorded Data: Displays the time information about recorded data on the drive. Selecting Clear All Data... will
clear all video data except the system log.

RECORD SETUP

o o
C (158 F) or higher.))
Digital Video Recorder
17