Eneo DIR-4108H Series Operating Instructions Manual page 26

Operating Instructions
System Event Settings (EVENT
Settings: Set up the DVR to run self-diagnostics.
System – Select the interval that you want the DVR to run self-diagnostics on the system.
Check Recording – Selecting the column allows you to set up the check recording schedule by selecting Schedule On.
Check Alarm-In – Selecting the column allow you to change interval the DVR to run self-diagnostics on alarm inputs.
Disk Almost Full – Select the percentage level of disk usage at which you want the DVR to trigger an alert.
Disk Bad – Select percentage level of bad disk sectors at which you want the DVR to trigger an alert.
Disk Temperature – Set the temperature threshold and (ºC (Celsius) or ºF (Fahrenheit)). If the temperature of hard disk
Actions: Set up actions the DVR will take whenever it detects system events. System events can sound the DVR's
internal buzzer and/or notify a number of different devices.
NOTE: The Beep action cannot be set to System event.
NOTE: For the Notify action to work, the Mail should be enabled in the NETWORK – Mail setup.
24
System Tab)
Selecting allows you to add a check recording schedule by setting the day, time range and interval
that you want the DVR to run self-diagnostics on the recorder. Selecting
check recording schedule.
drive exceeds the defined threshold, the system triggers an alert.
allows you to delete a