Table of Contents
Advertisement
User's Manual
NOTE: Day, Range and Channels that are not defined will use the setting values of the
previous schedule item.
NOTE: When more than two schedule items are registered in the same day and time range,
the DVR will follow the latest registered schedule item.
NOTE: When multiple events are detected at the same time from a specific channel, the
DVR will record event video with the high setting values if the ips, Quality, Resolution and
Dwell values of events are different from each other. However, the ips will be reset to the
supported maximum value when the ips, Quality, Resolution and Dwell are all set to the
highest value. (Advanced Mode Only)
Highlight the box under the
You will be asked to confirm that you want to delete the settings.
Highlight Default... and press the
Highlighting boxes under Quality and pressing the
quality for Time and Event recording. You can select from: Very High, High, Standard and
Basic. Highlighting boxes under Dwell and pressing the
of time you would like to record for the associated event. (Advanced Mode Only)
Pre
-Event
Highlight Pre-Event in the Record menu and press the
screen appears. If you do not have Event set up in the Record Schedule, a message will display
alerting you to this fact.
Figure 42 ─ Pre-Event setup screen.
You can set the amount of time to record prior to the event by adjusting the Dwell. You can set
the Dwell from 5 seconds to 30 minutes. The longer the dwell set, the fewer maximum ips can
be set.
40
heading and press the
button. The Default screen appears.
Highlighting boxes under ips and pressing the
allows you to set the images per second for Time and Event
recording. You can select from 0.10 to 30.0 images per
second.
When the DVR is in the Event Record mode it
is possible to have it record images before the
event occurs. The Pre-Event screen allows you
to define how to handle pre-event recording.
You can turn individual cameras On or Off for
pre-event recording. The image speed can be
set from 0.10 to 30.00 ips (25.00 ips PAL), and
image quality can be selectable from Very High,
High, Standard and Basic.
button to delete the recording settings.
button allows you to set the recorded image
button allows you to set the length
button, and the Pre-Event setup
button
Advertisement
Table of Contents
