Table of Contents
Advertisement
System Event
The DVR can be configured to run self-diagnostics and report the results.
Highlight the Settings box beside the desired event (System, Check Recording, Check Alarm-In, Disk Almost Full,
Disk Bad, or Disk Temperature), and press the
Highlight the Settings box beside System and press the
to run self-diagnostics on the system. You can select from 1 hr. to 30 days or Never.
Highlight the Settings box beside Check Recording and press the
You will be able to check the model name, serial number and the time information
about recorded data of the selected storage device.
If you want to erase recorded data on the selected device, highlight Clear and press
the
button. You will be asked whether or not you want to delete the data.
Figure 12: System – System Event setup screen.
button.
button. You can select the interval that you want the DVR
Highlighting Schedule On and pressing the
and Off. When set to On, you can select the day, time range and
interval that you want the DVR to run self-diagnostics on the recorder.
The Interval can be selectable from 1 min. to 7 days or Never.
Highlight the + and press the
box allows you to delete a check recording schedule.
Digital Video Recorder
button. The Check Recording screen appears.
button to add a schedule item. The
button toggles On
25
Advertisement
Table of Contents
