Eneo DIR-4108H Series Operating Instructions Manual page 16

Operating Instructions
NOTE: Even after changing the DVR settings by importing saved settings, the time-related settings (Date/Time,
Time Zone and Daylight Saving Time) will NOT be changed.
CAUTION: The USB device must be FAT16 or FAT32 format.
Show System Log...: Displays the system logs (up to 5,000 from the latest). The
column for system activities of remote sites.
Log Message
Boot Up
Shutdown
Restart
Upgrade (Local)
Upgrade Failure (Local)
Time Change (Local)
Time Zone Change (Local)
Time Sync
Time Sync Failure
Login : (Local/Remote)
Logout : (Local/Remote)
Setup Begin
User Management...: Registers users and changes the password, and assign authority levels to the group. Selecting
+ User... allows you to enter the user name and password. Selecting
Group. Selecting the Operator column allows you to assign authority levels to the group.
NOTE: Up to five Users can be registered to the Operator group.
NOTE: To enter a password by using the mouse, click the
the Turning On the Power section above for using the virtual keyboard.
CAUTION: Write down the new password and save it in a secure place. If the password is
forgotten, the unit must be reset using the Factory Reset button and all data settings will be lost.
14
Log Message
Setup End
Setup Imported
Setup Import Fail
Setup Exported
Setup Export Fail
Setup Export Cancel
Schedule On
Schedule Off
Clear All Data (Local)
Format Disk
DISK FULL
Auto Deletion
button, and a virtual keyboard displays. See
icon will be displayed in the last
Log Message
DISK# BAD
Search Begin (Local/Remote)
Search End (Local/Remote)
Clip-Copy Begin (Local/Remote)
Clip-Copy End (Local/Remote)
Clip-Copy Cancel (Local/Remote)
Clip-Copy Failure (Local/Remote)
Clip-Copy User:
Clip-Copy From:
Clip-Copy To:
Clip-Copy Duration of Video:
Clip-Copy Camera:
allows you to delete a User Name or an entire