Table of Contents
Advertisement
NOTE: When naming a file, you cannot use the following characters: \, /, :, *, ?, ", <, >, |.
Include Text-In Data: Pressing the
text-in data when copying video if the video was recorded with text-in data.
Once you have given the video clip a file name, select Start and press the
data size will appear. When the storage device does not have enough space, the DVR will ask if you want to copy as
much of the video clip as possible in the available space. Select Continue and press the
Once the clip copy starts, you can cancel it by selecting Stop or hide the screen by selecting Close. When selecting
Close, Clip Copy continues and a confirmation screen displays when complete.
NOTE: The file size for clip copy is limited to 2GB.
You can use other functions on the DVR while video is being copied. To do this, select Close and press the
You can return to the Clip-Copy screen at any time to check the progress.
You do not need to install any special software on your personal computer to review the video clips. Refer to the RAS
manual for instructions on how to review video clips you have copied.
NOTE: During Clip Copy, you cannot shut the system down, clear data on the storage device, or format the storage
device.
CAUTION: Do NOT disconnect the USB flash drive from the DVR while copying video clips.
WEBGUARD
WebGuard allows you to access a remote DVR, monitor live video images and search recorded video using Internet
Explorer web browser anytime from virtually anywhere.
Computer system requirements for using the WebGuard program are:
Operating System: Microsoft Windows
CPU: Intel Pentium III (Celeron) 600MHz or faster
RAM: 128MB or higher
VGA: 8MB or higher (1024x768, 24bpp or higher)
Internet Explorer: Version 6.0 or later
Start Internet Explorer on your local PC. You can run the WebGuard program by entering the following information
in the address field.
"http://IP address:port number" (The DVR IP address and the WebGuard port number (default: 12088) set in the Network
–
setup screen (WebGuard tab))
Or, "http://DVRNS server address/DVR name" (The DVRNS server address and the DVR name registered on the DVRNS
–
server)
Or, "http://www.dvronline.net" (Entering the DVR IP address or the DVR name will be required when logging in)
–
NOTE: You will need to get the appropriate IP address for the DVR you want to connect to and the WebGuard
port number from your network administrator.
NOTE: WebGuard only works with Microsoft Internet Explorer and will NOT work with other browsers.
button toggles between On and Off. When this feature is On, you can include
®
2000, Microsoft Windows
button. A confirmation screen displaying
button to continue clip copy.
®
XP or Microsoft Windows
Digital Video Recorder
button.
®
Vista
45
Advertisement
Table of Contents
