Eneo DIR-4108H Series Operating Instructions Manual page 48

Operating Instructions
Select between the WEBWATCH (Web monitoring) and WEBSEARCH (Web search) modes and enter the appropriate
port number of the program. Entering ID and PASSWORD and clicking the [LOGIN] button logs in using the selected
mode. Selecting Save ID saves the ID you entered.
You will need to enter the DVR IP address in the DVR ADDRESS field when running the WebGuard program by
entering http://www.dvronline.net. Selecting the Use DVRNS option allows you to enter the DVR name registered
on the DVRNS server instead of the IP address. You must enter the DVRNS server address and port number in the
SETUP setting when selecting the Use DVRNS option.
NOTE: The port numbers for WEBWATCH and WEBSEARCH should be the same port numbers used for Remote
Watch and Remote Search set during Network setup.
NOTE: When running the updated WebGuard for the first time, Internet Explorer might occasionally load the
information of the previous version. In this case, delete the temporary internet files by selecting Tools
Options General tab, and then run WebGuard again.
NOTE: There might be a problem that the bottom of WebGuard page is cropped due to the address or status bars
in Microsoft Internet Explorer 7.0. In this situation, it is recommended that websites open windows without address
or status bars by changing the internet setting. (Go to the Tools
Custom level... button
NOTE: When running WebGuard in the Microsoft Windows Vista operating system, it is recommended to start
Internet Explorer with elevated administrator permissions. Click the right mouse button on the Internet Explorer
icon and select the Run as administrator option from the context menu. Otherwise, some functions of the WebGuard
might be limited.
NOTE: There might be a problem with screen display or screen update due to low image transmission speed
when using the Microsoft Windows Vista operating system. In this situation, it is recommended that you disable
the Auto Tuning capability of your computer.
Run the Command Prompt with elevated administrator permissions (Go to the Start Menu
Command Prompt
int tcp set global autotuninglevel=disable" and press the enter key. Restart your computer to apply the changes.
If you want to enable the Auto Tuning capability again, enter "netsh int tcp set global autotuninglevel=normal"
after running the Command Prompt with elevated administrator permissions. Restart your computer to apply
the changes.
46
Select Enable for the Allow websites to open windows without address or status bars option)
Click the right mouse button and select the Run as administrator option). Then enter "netsh
Internet Options Security tab
Internet
Click the
Accessories