Searching Video - Eneo DIR-4108H Series Operating Instructions Manual

Operating Instructions

SEARCHING VIDEO

While in the Search mode, pressing the MENU button on the remote control displays the following menu icons at the
top of the screen. Pressing the MENU button again hides the menu icons.
NOTE: The menu icons also can be displayed by moving the mouse pointer to the top of the screen.
Search: Selects video from the event log, searches using a recording table, searches motion events or searches
text input strings (see below for more details).
Go To: Displays the first or last recorded image, or searches by date and time (see below for more details).
Export: Copies a video segment and saves it (see below for more details).
Camera Menu
Zoom: Selecting Zoom and choosing the camera number zooms the current playback image of the selected camera
on the screen. Selecting the
or moving the mouse pointer to the top of the screen exits the Zoom mode. While in the Zoom mode, the
displays on the camera screen if Zoom is selected in the Display setup screen (OSD tab).
Enable De-Interlace: Selecting Enable De-Interlace while in the full-screen mode turns the de-interlace filter on.
NOTE: The video signal has a time difference of 1/60 second between odd and even fields because it is composed
of 60 interlaced fields per second. When recording video with Very High (D1) resolution, video is made up of
frame units combining two fields – one odd field and one even field. This can cause horizontal scan lines or
flashes in areas with motion because of the time difference between the two fields. Turning on the de-interlace
filter provides clearer video by eliminating these horizontal scan lines and flashes.
NOTE: The Camera Menu also can be displayed by clicking the right mouse button on each camera screen.
38
(Exit) icon at the top of the screen by pressing the MENU button on the remote control
Edit Group: Selecting Edit Group supports the active cameo function. Select Edit Group
and choose a camera that you want to change the display position (e.g., Camera A). Then, click
the right mouse button to display the menu. If you choose another camera in the menu (e.g.,
Camera B), the screen displays Camera B instead of Camera A. Clicking the right mouse button
and selecting Exit Group Edit in the menu exits the Active Cameo mode.
Search
Go To
Export
Camera Menu
Alarm Off
Data Source
Exit
icon