Device Setup - Eneo DIR-4108H Series Operating Instructions Manual

Operating Instructions
Enable: The DVR can be set up to send an e-mail when an event occurs. Selecting the box enables the Mail function.
You will only be able to change the settings if Mail is enabled.
SMTP Server: Set the SMTP server IP address or domain name obtained from your system administrator.
NOTE: You will need to get the IP address or domain name of the SMTP server from your network administrator.
You can use the domain name instead of IP address if you set up the DNS server during Network setup.
Port: Set the SMTP server port number obtained from your system administrator.
Enable SSL/TLS: Check the box when sending an e-mail via an SMTP server requiring SSL (Secure Sockets Layer)
authentication.
Authentication: Select the button if the SMTP server needs authentication, and set up the Authentication by selecting
the Use box and entering the user ID and password.
NOTE: This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit
(http://www.openssl.org/).
Sender/Recipient: Enter the sender's/recipient's e-mail address. The e-mail address must include the "@" character
to be a valid address.

DEVICE SETUP

Camera Settings (DEVICE
No.: Selecting the box toggles all or each camera On and Off.
Title: Change the name of all or each camera.
28
Camera Tab)