Table of Contents
Advertisement
Operating Instructions
OSD Settings (DISPLAY
Status/Camera: Check each OSD item box to turn it On or Off.
Remote Control – The
Zoom – The
icon displays on the enlarged video.
Network – The
icon displays when the unit is connected to a network via Ethernet.
Freeze & Sequence – The
Screen Group – The screen group number displays when the DVR is in other than the 4x4 display mode for the 16-channel
DVR and 3x3 mode for the 8-channel DVR.
Free Space – The
icon displays when the DVR is in the Recycle mode. The percentage of available storage space displays
when the DVR is not in the Recycle mode.
Date/Time – The current date and time information displays.
User Name – The name of the current user logged in displays.
Camera No. – The camera number displays in the top-left corner of each camera screen.
Camera Title – The camera title displays in the top-left corner of each camera screen.
Record – The record related icons display on each camera screen.
PTZ – The
icon displays on each PTZ camera screen with PTZ capabilities.
Text-In – The text input strings display on the screen. You can adjust the Display Dwell time (sec.) for the text input strings
displayed on the screen.
Transparency: Adjust the transparency of the setup screens by using the slide bar.
OSD Margin...: Set the Horizontal and Vertical margins so that text and icons will display within the edges of the
monitor.
Main Monitor Settings (DISPLAY
30
OSD Tab)
icon displays when the DVR can be controlled using the infrared remote control.
icon displays while in the Freeze mode, and the
Main Monitor Tab)
icon displays while in the Sequence mode.
Advertisement
Table of Contents
