Eneo DIR-4108H Series Operating Instructions Manual page 24

Operating Instructions
Daytime Setup...: Select the button and set the Daytime range. The DVR will consider the remaining time range
as the nighttime.
Alarm-In Event Settings (EVENT
No.: Selecting the box toggles each alarm input On and Off.
Title: Change the name of all or each alarm input.
Type: Set each alarm input as NO (Normally open) or NC (Normally closed).
Actions: Set up actions the DVR will take whenever it senses an input on one of its alarm input connectors.
Alarm-Out – Select the alarm-out signals (Alarm-Out and Beep) to be associated with the alarm input. The DVR will alert
you of the event by activating an external alarm or internal buzzer when an input is detected on the selected
alarm input.
Notify – Select Mail if you want to send an e-mail to the address set during NETWORK – Mail setup when the DVR detects
an input on the selected alarm input.
PTZ – Select the preset position, where you want PTZ cameras to move to setup when the DVR detects an input on the selected
alarm input.
NOTE: For the Notify action to work, the Mail should be enabled in the NETWORK – Mail setup.
Text-In Event Settings (EVENT
Setup: Change all the parameters excluding Port settings of all the text input channels.
22
Alarm-In Tab)
Text-In Tab)