Table of Contents
Advertisement
PLAYBACK Buttons
Stop: Stops playback and enters the Live Monitoring mode.
Pause: Pauses the video.
Play: Plays back images at regular speed. The screen displays
RW (Rewind): Plays video backward at high speed. Pressing the button again toggles the playback speed from
,
and
.
FF (Fast Forward): Plays video forward at high speed. Pressing the button again toggles the playback speed from
,
and
.
Previous: Goes to the previous image.
Next: Goes to the next image.
In the Live Monitoring mode, pressing any playback button enters to the Search mode.
TURNING ON THE POWER
Connecting the power cord to the DVR turns on the unit. The unit will take approximately 30 seconds to initialize.
As soon as the DVR's initialization process completes, you might have the DVR's internal buzzer sound if not all
cameras (16 and 8 cameras for 16- and 8-channel DVR respectively) are installed to the DVR because the DVR is set
to use all camera channels by default. To turn the internal buzzer off, press the ALARM button on the remote control,
or move the mouse pointer to the top of the screen and click the
Before using your DVR for the first time, you will want to establish the initial settings. The following describes how
to use the remote control and mouse in the setup screen. Take a minute to review the descriptions.
To enter the setup
screen...
To select items...
To change values...
To enter characters...
NOTE: For simplicity, most of the operation explanations in this manual are based on using the Remote Control.
While setting up the DVR, there will be many opportunities to enter names and titles. When making these entries, a
Virtual Keyboard will appear.
displays on the screen when in the Pause mode.
,
and
displays on the screen respectively.
,
and
displays on the screen respectively.
Remote Control
In Live Monitoring mode, press the MENU
button to display the menu icons at the top
of the screen. Select the
pressing the
(Enter) button.
Move to the desired item by pressing the
arrow buttons (
,
it by pressing the
Select the desired item and press the Up and
Down arrow buttons (
or decrease the values and then press the
button to complete the entry.
Select the desired item and press the
button to displays a virtual keyboard. Move
to the desired character by pressing the arrow
buttons, and press the
Use the arrow buttons on the remote control to highlight the character you want
in the name or title and press the
bar and the cursor moves to the next position. Selecting
upper and lower case keyboards,
You can use up to 31 characters including spaces in your title.
Special characters can be created using ^ and a capital letter; e.g., ^J for NL (New
Line), ^M for CR (Carriage Return). Special characters are commonly used by
text input devices and will be useful when performing Text-In Searches.
when the DVR is playing back video.
(Alarm Off) icon.
(Setup) icon by
,
,
) and select
button.
,
) to increase
button.
Digital Video Recorder
Mouse
In the Live Monitoring mode, move the
mouse pointer to the top of the screen to
display hidden menu icons. Click the
(Setup) icon with the left button.
Click the desired item with the left button.
Select the desired item with the left button
and roll the mouse wheel up and down to
increase or decrease the values.
Select the desired item with the left button
to displays a virtual keyboard. Click the
desired character with the left button.
button. That character appears in the title
backspaces, and
deletes entered characters.
toggles between the
11
Advertisement
Table of Contents
