Eneo DIR-4108H Series Operating Instructions Manual page 33

Sequence – Mode: Select the sequence mode between Full Sequence and Cameo Sequence. (8- and 16-channel
Model Only) Selecting the Sequence menu icon at the top of the screen or pressing the SEQUENCE button on the
remote control causes the DVR to sequence cameras. The DVR can sequence cameras in two modes: "Full" and
"Cameo." In the Full mode, the DVR sequences through the cameras with predefined screen layouts. In the Cameo
mode, the bottom right window of a multi-screen format sequences through the cameras. See Chapter 3 – Operation,
Live Monitoring for details.
NOTE: You can define the screen layout in a variety of formats and set the DVR to sequence through the
different screen layouts (pages) so that all the cameras will be displayed. You also can set up the DVR to
display one camera or a group of cameras all the time while cycling through the remaining cameras in a "cameo"
window. This can be done with one camera displayed full screen while displaying the cameo window as a PIP
(picture-in-picture), or displaying the cameras in a grid pattern with the bottom right window as the cameo.
NOTE: Sequence cannot be used in the 4x4 display mode of the 16-channel DVR or 3x3 mode of the 8-channel
DVR.
Sequence – Interval: Select the display dwell time of sequence monitoring.
Event Monitoring On: Selecting the box turns the Event Monitoring On. When it is On, the DVR will display the
camera associated with the event when an event occurs. See Chapter 3 – Operation, Live Monitoring for details.
VGA Screen Position...: Adjust the screen position on the VGA monitor. Use the arrow buttons on the setup screen
to move the VGA screen position in the direction you want. Selecting the default button at the center cancels the
screen positioning operation and reloads the default position.
Digital Video Recorder
31