Search - Eneo DIR-4108H Series Operating Instructions Manual

Alarm Off: Resets the DVR's outputs including the internal buzzer during an alarm. Selecting the
same as pressing the ALARM button on the remote control.
Data Source: Selects the data source to be searched. Selecting Record searches recorded data on primary storage
installed in the DVR, and selecting Other searches recorded data on storage used for another DVR then installed
in this DVR.
Exit: Exits the Search mode and enters the Live Monitoring mode.

SEARCH

Event Log Search
The DVR maintains a log of each time the Alarm Input port is activated. The Event Log Search screen displays this list.
Use the arrow buttons to highlight the event for which you would like to see video.
Pressing the button will select the event video and display the first image of the event. Pressing the
on the remote control button will start playing the "event" video segment. If you want to return to live monitoring, press
the MENU button on the remote control and select the
NOTE: It is possible no recorded image displays on the current screen. Press the DISPLAY button on the remote
control and change the screen mode to 4x4 for the 16-channel DVR and 3x3 for the 8-channel DVR. You will be
able to easily see which cameras have recorded video for target time.
You also can narrow your event search by selecting Option... and setting up the new search condition.
From: Pressing the
When set to On, the search will be from the first recorded image.
button toggles between On and Off. When set to Off, you can enter a specific Date and Time.
(Exit) icon at the top of the screen.
Digital Video Recorder
icon is the
(Play) button
39