Table of Contents
Advertisement
Operating Instructions
FRONT PANEL CONTROLS
Alarm LED
HDD LED
LAN LED
Power LED
USB Port
Alarm LED
The Alarm LED is lit when alarm output or internal buzzer is activated.
HDD LED
The HDD LED flickers when the DVR is recording or searching video on the hard disk drive.
LAN LED
The LAN LED is lit when the unit is connected to a network via Ethernet.
Power LED
The Power LED is lit when the unit is On.
USB Port
Connect the supplied USB mouse to one of the ports. The USB mouse will be used to access many of the DVR's functions.
A USB flash drive can be connected to make video clip copies or for system upgrades. A USB to Serial converter can
be connected to the USB port, so multiple text-in devices can be used with a USB to Serial converter.
NOTE: The infrared sensor on the DVR is just to the right of the Power LED. Make certain that nothing blocks
the sensor, or the remote control will not function properly.
8
Advertisement
Table of Contents
