Eneo DIR-4108H Series Operating Instructions Manual page 18

Operating Instructions
Time: Set the system time, and select the time format.
Time Zone: Select your time zone.
Enable Daylight Saving Time: Selecting the box sets the system to enable daylight saving time.
Time Sync...: Set up the time synchronization between the DVR and standard time servers that are available in
most time zones and countries, or between the DVR and another DVR.
Automatic Sync – Selecting the box enables you to set up the automatic time synchronization.
Time Server – Enter the IP address or domain name of the time server.
Interval – Set the time interval for synchronization.
Last Sync-Time – Displays the last time the DVR was synchronized with the time server.
Run as Server – Selecting the box sets the DVR you are setting up to run as a time server.
Holiday...: Set up holidays.
– Displays the current date. Set the date to add for holiday.
– Deletes the selected date from holidays.
NOTE: Holidays that do not fall on the same date each year should be updated once the current year's holiday
has passed.
NOTE: The clock will not start running until you have selecting the Save button.
Storage Settings (SYSTEM
Capacity: Displays the capacity of the storage drive.
Status: Displays status of the DVR's storage devices. Selecting the column for the desired device displays the
Disk Bad, Temperature and S.M.A.R.T. information.
16
Storage Tab)