Pre-Event; Figure 32 ─ Pre-Event Setup Screen - Eneo DLR-1004/500V Operating Instructions Manual

Highlight the box under the Settings heading and press the
settings. You can set the ips and Quality of the recording. If you do not set the ips and Quality
l in the Settings column, the DVR will follow the default settings. See below for details.
NOTE: Descriptions of the Record icons in the Type column are as follows:
Time-lapse (Time)
NOTE: Channels that are not defined will use the setting values of the previous
schedule item.
Highlight the box under the
You will be asked to confirm that you want to delete the settings.
Highlight Default... and press the
Event
Pre-
Highlight Pre-Event in the Record menu and press the
appears. If you do not have Event set up in the Record Schedule, a message will display alerting
you to this fact.
Figure 32 ─ Pre-Event setup screen.
You can set the amount of time to record prior to the event by adjusting the Dwell. You can set
the Dwell from 5 seconds to 30 minutes. The longer the dwell set, the fewer maximum ips can
be set.
NOTE: When the DVR is in the Time or Time & Event mode, it ignores the pre-event settings
and follows the time settings.
Motion
heading and press the
button. The Default screen appears.
Highlighting boxes under ips and pressing the
to set the images per second for Time and Event recording. You can
select from 0.10 to 30.0 images per second. Highlighting boxes under
Quality and pressing the
image quality for Time and Event recording. You can select from:
Very High, High, Standard and Basic.
4-Channel Digital Video Recorder
button to define the recording
Video Loss
button to delete the recording settings.
button allows you to set the recorded
button, and the Pre-Event setup screen
When the DVR is in the Event Record mode it
is possible to have it record images before the
event occurs. The Pre-Event screen allows
you to define how to handle pre-event recording.
You can turn individual cameras On or Off for
pre-event recording. The image speed can be
set from 0.10 to 30.00 ips (25.00 ips PAL), and
image quality can be selectable from Very
High, High, Standard and Basic.
button allows you
29