System Event; Figure 12: System - System Event Setup Screen - Eneo DLR-2116/1.0TBV Operating Instructions Manual

System Event

The DVR can be configured to run self-diagnostics and report the results.
Highlight the Settings box beside the desired event (System, Check Recording, Check Alarm-In, Disk Almost Full,
Disk Bad, or Disk Temperature), and press the
Highlight the Settings box beside System and press the
DVR to run self-diagnostics on the system. You can select from 1 hr. to 30 days or Never.
Highlight the Settings box beside Check Recording and press the
You will be able to check the model name, serial number and the time information
about recorded data of the selected storage device.
If you want to erase recorded data on the selected device, highlight Clear and press
the button. You will be asked whether or not you want to delete the data.
Figure 12: System – System Event setup screen.
button.
Highlighting Schedule On and pressing the
On and Off. When set to On, you can select the day, time range
and interval that you want the DVR to run self-diagnostics on the
recorder. The Interval can be selectable from 1 min. to 7 days
or Never. Highlight the + and press the
schedule item. The
schedule.
button. You can select the interval that you want the
button. The Check Recording screen appears.
box allows you to delete a check recording
Digital Video Recorder
button toggles
button to add a
25