Related Manuals for Eneo DTR-2009/250CD
Summary of Contents for Eneo DTR-2009/250CD
- Page 1 Operating Instructions Digital Video Recorder Models: DTR-2009/250CD, DTR-2016/250CD, DTR-2009/500CD, DTR-2016/500CD, DTR-2009/750CD DTR-2016/750CD...
-
Page 3: Safety Instructions
Safety instructions EMC class ► This digital video recorder (DVR) is a class A device in accordance with EN 55022. ► This device may cause interference to other equipment in domestic use. In such cases the persons opera- ting the DVR are required to provide appropriate countermeasures, for which they themselves bear the cost. Importance of these Operating Instructions ►... -
Page 5: Table Of Contents
Table of contents Overview Package contents Basis functions Features Requirements for operation Control options Connections on the rear Front panel controls Key to controls Function buttons PTZ camera functions Playback functions Remote control functions Playback functions Menu overview Accessing the menus Accessing the Display menu Accessing the PTZ menu Accessing the Setup menu... - Page 6 Table of contents Menu descriptions – Setup menu System – Information System – Date/Time System – Storage System – User System – Shutdown System – Log out user1... Network – Network Network – Notification Devices – Camera Devices – Audio Devices –...
-
Page 7: Overview
Overview Package contents ● Digital video recorder (DVR) ● Mains power cord ● Operating instructions ● RAS (Remote Administration System) software on CD ● Operating instructions for RAS software on paper and CD ● Mounting kit for rack installation ● Screws for attaching SCSI Connector ●... -
Page 8: Connections On The Rear
Connections on the rear Note: Connections optionally for NTSC or PAL operation. VIDEO OUT SPOT 1 SPOT 2 VIDEO IN SVHS OUT SPOT 3 SPOT 4 LOOP RS-485 AI1 AI2 AI3 AI4 AI5 AI6 AI7 AI8 GND AI10 AI11 AI12 AI13 AI14 AI15 AI16 AO1 AO2 AO3 AO4 AO5 AO6 AO7 AO8 GND... -
Page 9: Front Panel Controls
Front panel controls The following diagram and table shows the controls on the front panel of the DVR: PANIC CAMERA SEARCH PLAY/PAUSE DISPLAY SEQUENCE FREEZE SPOT BACKWARD FORWARD NETWORK POWER MENU ALARM ZOOM Designation Function USB ports Eject built-in CD-RW writer ●... -
Page 10: Key To Controls
Key to controls Function buttons Element Function ● Change display mode ● Switch video input by pressing and holding down button Sequence On/Off Freeze On/Off PTZ camera functions On/Off Zoom On/Off Spot monitor assignments PTZ camera functions Element Function Zoom in Zoom out Close-up Wide-angle... -
Page 11: Remote Control Functions
Remote control functions The following diagram and table shows the functions on the remote control: Designation Function SPOT 1 - 4 Spot monitor assignments Select System ID SPOT ● Reset alarm ALARM DISPLAY SEQUENCE FREEZE ALARM ● View event list CAMERA ●... -
Page 12: Menu Overview
Menu overview The following illustration shows the structure of the complete menu tree that is accessible using the mouse control: Display Camera 1. CAM1 2. CAM2 . CAM Left-Top Left-Bottom Right-Top Right-Bottom Size 1/16 Size 1/9 Size 1/4 Previous Group Next Group Edit Group Camera... - Page 13 Menu overview, continued The following illustration shows the structure of the complete menu tree that is accessible using the mouse control: Setup menu... System Information Date/Time Storage User Shutdown... Log out user1... Network Network Notification Devices Camera Audio Alarm-Out Display Remote Control Record Record...
-
Page 14: Accessing The Menus
Accessing the menus Accessing the Display menu Requirement: ● The current camera image is shown in full image or quad image. Step Action Access using Key sequence/menu path Device Open Display menu... Remote control Mouse Display Access to submenu via Device/Remote Control Submenu Camera image Key sequence... -
Page 15: Accessing The Setup Menu
Accessing the menus, continued Accessing the Setup menu Requirement: ● The current camera image is shown in full image or quad image. Step Action Access using Key sequence/menu path Device Open Setup menu... Remote control MENU Result: Prompt for user name and password. -
Page 16: Getting Started
Getting started Checklist for DVR operation Step Action Menu path Connect peripheral devices as per planned setup. Specify menu language.. Setup menu... > System > Information Adjust date and time.. Setup menu... > System > Date/Time Set up user. Setup menu... > System > User Set up network and desired notification channels Setup menu... -
Page 17: Switching On The Dvr
Getting started, continued Switching on the DVR Requirement: ● The start-up preparations are complete. Step Action Plug in DVR mains plug. Switch on monitor. Result: System starts up automatically and is ready to use. Switching off the DVR Requirement: ● You have accessed the Setup menu. -
Page 18: Administration
Administration Saving your system setup You can save your DVR’s setup data, including its network configuration. Requirement: ● USB memory stick Step Action Menu path Insert a USB memory stick into one of the USB ports Setup menu... > System > Information > Export your setup. -
Page 19: Downloading Software Updates
Administration, continued Downloading software updates You can download software updates for your DVR from a USB memory stick. Requirement: ● USB memory stick with latest software release Step Action Menu path Insert a USB memory stick into one of the USB ports. -
Page 20: Determining The Memory Requirement Of A Recording
Administration, continued Determining the memory requirement of a recording The amount of memory recorded video sequences will take up depends on the following factors: ● picture quality ● number of images per second ● duration The memory requirement is calculated by this formula: Memory requirement = picture size x duration of recording x images per second Example calculation of CIF resolution (PAL): Approx. -
Page 21: Searching For Recordings
Searching for recordings Find first stored recording Search Go to the First Find last stored recording Search Go to the Last Find recording by date and time Search Go to the Date/Time... Calendar search For each camera the calendar search indicates: ●... -
Page 22: Using Calendar Search
Using calendar search Performing a calendar search Step Action Menu path Open calendar search. Search > Calendar Search... Result: Calendar and time line are displayed. Select day and time Confirm input. Search Calendar Search... Term Symbol Meaning Date display ● Grey: No recording available ●... -
Page 23: Using Event Log Search
Using event log search Performing an event log search Step Action Menu path Open event log search. Search > Event Log Search... Result: The result of the last search is displayed. Define criteria. Option... Confirm input. Search Result: List of search results is displayed. Select desired entry from list. -
Page 24: Using Text-In Search
Using text-in search Performing a text-in search Step Action Menu path Open text-in search. Search > Text-In Search... Result: The result of the last search is displayed. Define text inputs. Option... Confirm input. Search Result: List of search results is displayed. Select desired entry from list. -
Page 25: Using Motion Search
Using motion search Performing a motion search Step Action Menu path Display desired camera in single frame. Display > Camera > ... Open motion search. Search > Motion Search... Enter settings for motion search. Option... Confirm input. Search Result: List of search results is generated. Select desired entry from list. -
Page 26: Copying Recordings
Copying recordings Copying recordings to CD or USB memory stick Step Action Menu path Find desired recordings. Search > ... Note: Make a note of the data of the recordings you want to copy. Define settings. Search > Clip-Copy... Start copying. Start Result: The recordings are copied. -
Page 27: System Menu
Menu descriptions – Setup menu The Setup menu has the following sub-menus: System menu On the “System” menu ● the basic settings are made ● users are administered ● the system is shut down Network menu On the “Network” menu the network settings are made. Network access provides access to all the functions of the DVR via ●... -
Page 28: Setup Menu
Setup menu System – Information On the “Information” menu ● basic information is entered and displayed ● software updates are installed ● recorded data are deleted as required Setup menu... System Information Term Symbol Meaning Site Location of DVR Identifier for remote control ●... -
Page 29: System - Date/Time
Setup menu, continued System – Date/Time On the “Date/Time” menu ● time and date settings are made ● dates of public holidays are entered ● time synchronisation is configured. Setup menu... System Date/Time Date/Time Symbol Meaning Term Date Date Format Date display format Time Time... -
Page 30: System - Storage 0
Setup menu, continued System – Storage On the “Storage” menu the status and usage of the available storage media is displayed. Setup menu... System Storage Information Term Symbol Meaning Type Type of storage medium Capacity Size of storage medium Format Storage medium usage >>... - Page 31 Setup menu, continued Setup menu... System Storage Status Term Symbol Meaning Type Memory type Disk Bad Data carrier status Temperature Temperature status S.M.A.R.T. Result of S.M.A.R.T. check DTR-20XX...
-
Page 32: System - User 2
Setup menu, continued System – User On the “User” menu the user groups and individual users are set up. Setup menu... System User Term Symbol Meaning Group & User Assignment of group access privileges Group field Table of possible group access privileges >> Group &... -
Page 33: System - Shutdown
Setup menu, continued System – Shutdown Setup menu... System Shutdown... System – Log out user1... Setup menu... System Log out user1... Network – Network On the “Network” menu all settings required to ensure network access are made. Setup menu... Network Network Network Term... - Page 34 Setup menu, continued Setup menu... Network Network Term Symbol Meaning Type of connection to DVR: Manual connection required input of: ● IP address Manual ● Gateway ● Subnet Mask Automatic assignment of IP address of DNS Type DHCP server Requires following input as specified by provider: ADSL (with ●...
- Page 35 Setup menu, continued Setup menu... Network Network DVRNS Term Symbol Meaning Use DVR Name Service Enables the DVR name service IP address or domain name of DVRNS server DVRNS Server DVRNS = Digital Video Recorder Name Service Port Port for DVRNS Use NAT Enables NAT (Network Address Translation) use Name by which the DVR is to be registered with the DVRNS...
-
Page 36: Network - Notification
Setup menu, continued Network – Notification On the “Notify” menu the method of notification is defined. Setup menu... Network Notification Mail Term Symbol Meaning Enable Enables notification by e-mail SMTP Server IP address or domain name of SMTP server Port for SMTP server Port Default is port 25. -
Page 37: Devices - Camera 7
Setup menu, continued Devices – Camera On the “Camera” menu the cameras are configured. Setup menu... Devices Camera Settings Term Symbol Meaning Activates the cameras Title Name of camera Visibility of recordings and camera data depending on user access privileges: Normal All users see all camera data and all recordings Users without relevant access see camera title, status... -
Page 38: Devices - Audio 8
Setup menu, continued Devices – Audio On the “Audio” menu the audio outputs are assigned to the cameras. Setup menu... Devices Audio Term Symbol Meaning Number of audio output Associated Camera Assignment of camera Enable Audio-Out Enables all audio outputs DTR-20XX... -
Page 39: Devices - Alarm-Out 9
Setup menu, continued Devices – Alarm-Out On the “Alarm-Out” menu the alarm outputs are configured. ● “Settings” tab: The alarm outputs are configured. ● “Schedule” tab: Time slots are defined in which the alarm outputs respond in specific ways. Setup menu... Devices Alarm-Out Settings... -
Page 40: Devices - Display
Setup menu, continued Devices – Display On the “Display” menu the mode of on-screen display is configured. ● “OSD” tab: Specify what additional information is displayed on-screen. ● “Main Monitor” tab: Specify how the camera images are displayed on the main monitor. ●... -
Page 41: Devices - Remote Control
Setup menu, continued Setup menu... Devices Display Main Monitor Term Symbol Meaning Modes of sequences in multiple playback: Full All cameras are switched through sequentially. Sequence Mode Only the image at the bottom right is switched Cameo through; cameras in „Covert“ mode are not Sequence displayed to users without „Covert“... -
Page 42: Record - Record
Setup menu, continued Record – Record On the “Record” menu the basic settings for recordings and their quality are made. Setup menu... Record Record Term Symbol Meaning Enables automatic overwriting of the oldest recordings when the hard disk is full Recycle Note: If not enabled, recording ends when the hard disk is full. -
Page 43: Record - Schedule
Setup menu, continued Record – Schedule On the “Schedule” menu the schedule for recording is defined. Setup menu... Record Schedule Term Symbol Meaning Enables schedule entries Schedule On Note: A recording is made only if schedule entries are enabled. Otherwise only panic recording is possible. Number of schedule entry Day of the week Range... -
Page 44: Record - Pre-Event
Setup menu, continued Record – Pre-Event On the “Pre-Event” menu the settings for recording prior to the event are made. Setup menu... Record Pre-Event Term Symbol Meaning Activates the cameras Number of recorded images per second prior to the event Quality Picture quality of the recorded images prior to the event Recording time prior to the event... -
Page 45: Record - Archive
Setup menu, continued Record – Archive On the “Archive” menu the schedules and settings for archiving are entered. Setup menu... Record Archive Term Symbol Meaning Archive On Enables the archiving settings Schedule Day of week from which to archive recordings Range Time range Archive Data Range... -
Page 46: Event - Alarm-In
Setup menu, continued Event – Alarm-In On the “Alarm-In” menu the alarm inputs and responses to events are configured. Setup menu... Event Alarm-In Settings Term Symbol Meaning Enables the alarm inputs Title Name of alarm input Contact method of alarm input: Type Normally Open Normally Closed... - Page 47 Setup menu, continued Setup menu... Event Alarm-In Actions 2 Term Symbol Meaning Number of alarm input Select PTZ cameras to record in event of alarm and select the desired settings Select spot monitor on which camera image is displayed in Spot Monitor event of alarm DTR-20XX...
-
Page 48: Event - Motion Detection
Setup menu, continued Event – Motion Detection On the “Motion Detection” menu the motion-sensitive zones are defined and responses to events configured. Setup menu... Event Motion Detection Settings Term Symbol Meaning Enables motion detection for the camera Sensitivity of motion detection: Sensitivity Daytime Nighttime... - Page 49 Setup menu, continued Setup menu... Event Motion Detection Actions 1 Term Symbol Meaning Number of alarm input Assignment of cameras to record in event of alarm These cameras must be in “Event” or “Time and Event” mode Record within the time slot: Setup menu >...
-
Page 50: Event - Video Loss
Setup menu, continued Event – Video Loss On the “Video Loss” menu checking for covert cameras and the responses to events are configured. Setup menu... Event Video Loss Settings Term Symbol Meaning Sensitivity of check as to whether camera is covert: Check Obscuration Never not checked... - Page 51 Setup menu, continued Setup menu... Event Video Loss Actions 2 Term Symbol Meaning Number of covert camera Select PTZ cameras to record in event of alarm and select the desired settings Select spot monitor on which camera image is displayed in Spot Monitor event of alarm DTR-20XX...
-
Page 52: Event - Text-In
Setup menu, continued Event – Text-In On the “Text-In” menu the text input device is defined and the responses to text input are configured. Setup menu... Event Text-In Settings Term Symbol Meaning Number of text input device Setup Configuration of text input >> Title Name of text input Setup... - Page 53 Setup menu, continued Setup menu... Event Text-In Actions 1 Term Symbol Meaning Number of alarm input Assignment of cameras to record in event of alarm These cameras must be in “Event” or “Time and Event” mode Record within the time slot: Setup menu >...
-
Page 54: Event - System Event
Setup menu, continued Event – System Event On the “System Event” menu the self-diagnostics and corresponding messages are configured. Setup menu... Event System Event Health Check Term Symbol Meaning System System self-diagnostics interval Check Recording Setup..Configuration of schedule >> Check Alarm-In Interval and status for checking alarm inputs Setup... - Page 55 Setup menu, continued Setup menu... Event System Event Actions Term Symbol Meaning Events (based on checks): System System check failed Panic Record Panic recording in progress Check Recording Recording check failed Check Alarm-In Check of alarm inputs failed Preset limit value for hard disk capacity Event Disk Almost Full reached...
-
Page 56: Event - Event Status
Setup menu, continued Event – Event Status The “Event Status” menu indicates the status of all possible events: ● Grey text: Event detection not enabled ● White text: Event detection enabled ● Flashing border: Message – acute event for 5 sec ●... -
Page 57: Specifications Dtr-2009
Frame image, 4-/9-channel split, PIP Post-alarm recording Up to 15 minutes VGA playback recommended only on monitors with Multisync function RS-485 port for PTZ control (verified protocols: eneo-Fastrax, Pelco P/D) or Control interface keyboard connection for remote control Activity detection... - Page 58 Specifications DTR-2009, continued Model DTR-2009/250CD DTR-2009/500CD DTR-2009/750CD Basic: 2/2.4 KB; Standard: 4/4.8 KB; High: 8/9.6 KB; Very high: 12/14.4 KB Picture size (NTSC/PAL). 2 times larger in High Resolution mode 250 GB ATA hard 500 GB ATA hard disk, disk, expandable to...
-
Page 59: Specifications Dtr-2016
Frame image, 4-/9-/16-channel split, PIP Post-alarm recording Up to 15 minutes VGA playback recommended only on monitors with Multisync function RS-485 port for PTZ control (verified protocols: eneo-Fastrax, Pelco P/D) or Control interface keyboard connection for remote control Activity detection... - Page 60 Specifications DTR-2016, continued Model DTR-2016/250CD DTR-2016/500CD DTR-2016/750CD Basic: 2/2.4 KB; Standard: 4/4.8 KB; High: 8/9.6 KB; Very high: 12/14.4 KB Picture size (NTSC/PAL). 2 times larger in High Resolution mode 250 GB ATA hard 500 GB ATA hard disk, disk, expandable to 750 GB ATA hard Hard disk capacity expandable to as many...
-
Page 61: Accessories
Accessories EDP No. Short description 71857 250GB hard disk for DLR/DXR/DTR and DCR 71919 500GB hard disk for DLR/DXR/DTR and DCR 74088 System keyboard with -axis joystick 74092 System keyboard with joystick, 5” monitor 71902 USB mouse for DVR series DXR, DLR 9092 15”... -
Page 62: Supported Ptz Cameras
Power Controller Dongyang Unitech DRX-500 Sungjin Receiver/MPU Dongyang DY-255RXC Costar SIC722V Sensormatic Delta Dome II/Ultra IV Samsung Techwin SPD 1600 Eneo Fastrax Samsung Samsung Dome Philips G Basic AutoDome Pelco Spectra Dome LG Honeywell) GRU604A Samsung Techwin SRX-100B TK-S576 Hitron... -
Page 63: Index
Index Control options 7 Control protocols 62 Accessories 61 Controls Alarm Front panel controls 9 Configuring inputs 46 Remote control 11 Configuring outputs 9 Copying recordings 26 Connecting inputs 8 Covert camera setup 19, 7 Connecting outputs 8 Covert mode 19, 7 Motion detection 49 Resetting 9 Setting schedule for outputs 9... - Page 64 Index, continued Getting started Recordings Video recorder , 16 Copying 26 Deleting 18 Memory requirement 20 Searching 21 Health check 54 Setting schedule 4 Recycling the device 66 Remote control IP address 4, 5 Controls 11 Setting system ID 16, 28 Reset 8, 19 Restoring factory defaults 19 Network configuration 4...
- Page 65 Index, continued Storage media Displaying status 0 Displaying usage 0 Setting automatic overwrite 42 Switching off 17 Switching on 17 System Exporting configuration 28 Importing configuration 28 Log out USER Shutdown System events Configuring 54 Health check 54 Text-in search 24 Time Setting 29...
-
Page 66: Notes On Disposal
Notes on disposal Correct disposal of this DVR WEEE (Waste Electrical & Electronic Equipment) Applicable in the member states of the European Union and other European coun- tries with a separate collection system The marking on the DVR and on the documentation stipulates that it must not be thrown away in normal domestic waste at the end of its useful life. - Page 68 Videor Technical E. Hartig GmbH Exclusive distribution through specialised trade channels only. VIDEOR TECHNICAL E. Hartig GmbH Operating Instructions version 08/2007 (V1.6) Carl-Zeiss-Str. 8 · 622 Rödermark, Germany Tel. +49 (0) 6074 / 888-0 · Fax +49 (0) 6074 / 888-100 Subject to technical change without notice.
Need help?
Do you have a question about the DTR-2009/250CD and is the answer not in the manual?
Questions and answers