Safety Information; Power Supply - Epson AcuLaser C4000 Service Manual

To prevent accidents during a maintenance procedure, strictly observe
the Warnings and Cautions. Do not do anything that is dangerous or not
within the scope of this document.
Do not do anything that is dangerous even if not specifically described
in this manual. In addition to the descriptions below and those given in
this manual, there are many situations and circumstances that are
dangerous. Be aware of these when you are working with the printer.

Safety Information

Power Supply

Before starting any service procedure, switch off the printer power and
unplug the power cord from the wall outlet. If you must service the
printer when the power is applied, be aware of the potential for electrical
shock and do all tasks by following the procedures in this manual.
W A R N I N G
Do not touch any live part unless you are instructed
to do so by a service procedure.
The LVPS power supply switch/inlet part is live even
when the power switch has been turned off. Do not
touch any live part.
Do not touch electrified components except when
instructions indicate it is permissible to do so.
Figure 0-1. Power Supply