EPSON AcuLaser C4000/C4100/C3000
4.2.20.13 LINK ACTUATOR (PL17.3.6) Removal
1. Remove the CASSETTE of the TRAY 2,3. (See Section 4.2.20.1.)
2. Remove the LINK ACTUATOR from the protrusions of the ACTUATOR NO
PAPER (PL17.3.5) by making it wider, then pull it from the holes in the
opening of the FRAME ASSY OPF (PL17.1.3).
When assembling, bring large components to the machine
from the right side (as seen when facing the front of the
unit).
Installing the LINK ACTUATOR, do it after passing front end
of the LINK ACTUATOR to the hole of the opening of the
FRAME ASSY OPF.
Disassembly and Assembly
Figure 4-131. LINK ACTUATOR (PL17.3.6) Removal
Disassembly Assembly Procedures
Revision F
HANABI_FDR_CHAP03_014FC
4-428