Epson AcuLaser C4000 Service Manual page 56

EPSON AcuLaser C4000/C4100/C3000
CONFIDENTIAL JOB MENU *
Item Value
user xxxxxxxxxxxxxx
2
Enter Password * XXXX
Job * 3 xxxxxxxxxxxxxxx
4 ∼
Copies * 1 999
Delete * 4 * 5
*1: This menu is not displayed when nothing is registered in the Confidential
Job.
*2: By selecting the Value (User name) and pressing the Enter button when the
User is displayed, this Item appears. A password must be input pressing
the 1 (Back), 2 (Up), 3 (Enter), and 4 (Down) buttons.
*3: After entering a password when Enter Password is displayed, this item
appears if a job with the matching password exists.
*4: By selecting the Value (Job name) and pressing the Enter button when the
Job is displayed, this Item appears and can be selected and executed. After
executing this Item, the printer return to the status when recovering from
the SelecType mode.
*5: After activating Delete, display will return to Job. If there is no Job, display
will return to User. If there is no User, display will return to previous
condition after escaping from Select Type.
RESET MENU
Item Value
Clear Warning
Reset
Reset All
SelecType Init
Product Descriptions
1 PARALLEL MENU *
Item
Parallel I/F
Speed
Bi-D
Buffer Size
*1: When this setting is changed, the setting value becomes valid after warm
boot or restarting the printer.
The setting value is reflected immediately to the Status Sheet and EJL
read-back, however it is changed in practice after warm boot or restarting
the printer.
USB MENU * 1
Item
USB I/F
Buffer Size
*1: When this setting is changed, the setting value becomes valid after warm
boot or restarting the printer.
The setting value is reflected immediately to the Status Sheet and EJL
read-back, however it is changed in practice after warm boot or restarting
the printer.
Control Panel
1
Value
On , Off
Fast , Normal
Nibble , ECP , Off
Normal , Maximum , Minimum
Value
On , Off
Normal , Maximum , Minimum
Revision F
1-40