Epson AcuLaser C4000 Service Manual page 457

EPSON AcuLaser C4000/C4100/C3000
4.2.20.31 GEAR IDLER (PL17.3.15) Removal
TRAY 2
1. Remove the COVER FRONT. (See Section 4.2.20.1.)
2. Remove the COVER R. (See Section 4.2.20.2.)
3. Remove the COVER L. (See Section 4.2.20.3.)
4. Remove the CHUTE ASSY TURN of the TRAY 2. (See Section 4.2.20.4.)
5. Remove the HARNESS ASSY FDR 2T (gray). (See Section 4.2.20.5.)
6. Remove the DRIVE ASSY FEEDER. (See Section 4.2.20.7.)
7. Remove the PWBA FEEDER. (See Section 4.2.20.10.)
8. Remove the GUIDE ASSY CASSETTE R of the TRAY 2. (See Section
4.2.20.11.)
9. Remove the GUIDE ASSY CASSETTE L of the TRAY 2. (See Section
4.2.20.12.)
10. Remove the LINK ACTUATOR of the TRAY 2. (See Section 4.2.20.13.)
11. Remove the PICK UP ASSY TR 2. (See Section 4.2.20.14.)
12. Remove the STOPPER CLUTCH. (See Section 4.2.20.29.)
13. Remove the CLUTCH ASSY TURN. (See Section 4.2.20.30.)
14. Remove the GEAR FEED 2. (See Section 4.2.20.28.)
15. Remove the GEAR IDLER.
TRAY 3
1. Remove the COVER FRONT. (See Section 4.2.20.1.)
2. Remove the COVER R. (See Section 4.2.20.2.)
3. Remove the STOPPER CLUTCH. (See Section 4.2.20.29.)
4. Remove the CLUTCH ASSY TURN. (See Section 4.2.20.30.)
5. Remove the GEAR FEED 2. (See Section 4.2.20.28.)
6. Remove the GEAR IDLER.
Disassembly and Assembly Disassembly Assembly Procedures
Figure 4-149. GEAR IDLER (PL17.3.15) Removal
Revision F
HANABI_FDR_CHAP03_032FD
4-442