Epson AcuLaser C4000 Service Manual page 461

EPSON AcuLaser C4000/C4100/C3000
4.2.20.35 ACTUATOR NO PAPER (PL17.3.5) Removal
TRAY 2
1. Remove the COVER FRONT. (See Section 4.2.20.1.)
2. Remove the COVER R. (See Section 4.2.20.2.)
3. Remove the COVER L. (See Section 4.2.20.3.)
4. Remove the CHUTE ASSY TURN. (See Section 4.2.20.4.)
5. Remove the HARNESS ASSY FDR 2T (gray). (See Section 4.2.20.5.)
6. Remove the DRIVE ASSY FEEDER. (See Section 4.2.20.7.)
7. Remove the PWBA FEEDER. (See Section 4.2.20.10.)
8. Remove the GUIDE ASSY CASSETTE R. (See Section 4.2.20.11.)
9. Remove the GUIDE ASSY CASSETTE L. (See Section 4.2.20.12.)
10. Remove the LINK ACTUATOR. (See Section 4.2.20.13.)
11. Remove the PICK UP ASSY TR 2. (See Section 4.2.20.14.)
12. Put the PICK UP ASSY TR 2 bottom faced up on the work table.
13. While releasing the hooks of the ACTUATOR NO PAPER, remove the
opposite side front end from the holes of the frame opening on the PICK
UP ASSY by moving it in the direction of the arrow and pulling it out.
TRAY 3
1. Remove the COVER FRONT. (See Section 4.2.20.1.)
2. Remove the COVER R. (See Section 4.2.20.2.)
3. Remove the COVER L. (See Section 4.2.20.3.)
4. Remove the CHUTE ASSY TURN. (See Section 4.2.20.4.)
5. Remove the HARNESS ASSY FDR 3T (blue). (See Section 4.2.20.6.)
6. Remove the GUIDE ASSY CASSETTE R. (See Section 4.2.20.11.)
7. Remove the GUIDE ASSY CASSETTE L. (See Section 4.2.20.12.)
8. Remove the LINK ACTUATOR. (See Section 4.2.20.13.)
9. Remove the PICK UP ASSY TR 3. (See Section 4.2.20.15.)
10. Put the PICK UP ASSY TR 3 bottom faced up on the work table.
11. While releasing the hooks of the ACTUATOR NO PAPER, remove the
opposite side front end from the holes of the frame opening on the PICK
UP ASSY by moving it in the direction of the arrow and pulling it out.
Disassembly and Assembly
Figure 4-153. ACTUATOR NO PAPER (PL17.3.5) Removal
Disassembly Assembly Procedures
Revision F
4-446