EPSON AcuLaser C4000/C4100/C3000
Lifting the upper unit of the printer body should be done by
W A R N I N G
2 people.
When removing the FEEDER ASSY from the printer body
C A U T I O N
upper unit, be careful not to drop the upper unit or
damage the components.
When lifting the printer body, remove it by allowing the left
side HARNESS ASSY TEMP B (PL15.2.12) and right side
HARNESS ASSY OPF MAIN (PL15.2.8) and the HARNESS
ASSY FEEDER (PL4.3.28) to come free of the square holes
in the printer's main frame.
13. Lift the printer body and clear it from the FEEDER ASSY.
14. Remove the PICKUP ASSY. (See Section 4.2.7.11.)
15. Disconnect the connector (P/J473) on the SENSOR NO/LOW PAPER
(Tray1 L/P).
16. Release the 3 hooks securing the SENSOR NO/LOW PAPER (Tray1 L/P)
to the PICKUP ASSY (PL4.3.1), and remove the SENSOR NO/LOW
PAPER(Tray1 L/P) from the PICKUP ASSY.
Disassembly and Assembly
Disassembly Assembly Procedures
Revision F
4-345