Epson AcuLaser C4000 Service Manual page 334

EPSON AcuLaser C4000/C4100/C3000
4.2.4.14 COVER SIDE L (PL1.2.1) Removal
1. Remove the COVER ASSY TOP MAIN. (See Section 4.2.4.4.)
2. Remove the 1 screw (silver, with a brim, 8mm) securing the COVER SIDE
L to the rear side of the printer body.
3. Release the 1 hook securing the front side of the COVER SIDE L.
In the next procedure, it is easy to remove by moving the
C H E C K
P O I N T
front of the COVER SIDE L with pushing and spreading
COVER ASSY FRONT IN (PL 1.2.10) to outside a little bit.
4. Remove the COVER SIDE L from the printer body.
Disassembly and Assembly Disassembly Assembly Procedures
Figure 4-19. COVER SIDE L (PL1.2.1) Removal
Revision F
HANABI_BE_CHAP03_007FD
4-318