Epson AcuLaser C4000 Service Manual page 438

EPSON AcuLaser C4000/C4100/C3000
4.2.20.10 PWBA FEEDER (PL17.4.1) Removal
1. Remove the COVER FRONT. (See Section 4.2.20.1.)
2. Remove the COVER R. (See Section 4.2.20.2.)
3. Disconnect the harness (P/J81, 82, 83, 84) on the PWBA FEEDER.
4. Remove the 4 screws (silver, 6mm) securing the PWBA FEEDER to the
FRAME ASSY OPF (PL17.1.3), and remove the PWBA FEEDER.
When installing, combine the BOARD to the hole of the
PWBA FEEDER and the opening of the FRAME ASSY OPF.
(2 places)
Disassembly and Assembly Disassembly Assembly Procedures
Figure 4-127. PWBA FEEDER (PL17.4.1) Removal
Revision F
HANABI_FDR_CHAP03_009FC
4-423