Epson AcuLaser C4000 Service Manual page 332

EPSON AcuLaser C4000/C4100/C3000
4.2.4.11 COVER MSI (PL1.2.21) Removal
1. Open the COVER MSI (PL1.2.21) from the front side of printer body.
2. While allowing the left side of the COVER MSI left side elongated hole
section to bend, pull out the reinforced portion of the TRAY ASSY MSI
(PL7.2.12) of the elongated hole section.
3. Pull the reinforced portion of the TRAY ASSY MSI from the COVER MSI
right side elongated hole section.
4. While lowering the front edge of the COVER MSI, pull the COVER MSI
toward the front and remove it.
Figure 4-16. COVER MSI (PL1.2.21) Removal
Disassembly and Assembly
4.2.4.12 TRAY ASSY MSI (PL1.2.12) Removal
1. Open the COVER MSI (PL1.2.21) from the printer body.
2. Remove the COVER MSI. (See Section 4.2.4.11.)
3. Open the TRAY ASSY MSI, slide the PLATE ASSY BOTTOM MSI
(PL7.1.42) inward then lift it up to avoid the left and right mounting pieces
and remove the plate.
HANABI_BE_CHAP03_113FB
Disassembly Assembly Procedures
Figure 4-17. TRAY ASSY MSI (PL1.2.12) Removal
Revision F
HANABI_BE_CHAP03_114FB
4-316