Epson AcuLaser C4000 Service Manual page 455

EPSON AcuLaser C4000/C4100/C3000
4.2.20.28 GEAR FEED 2 (PL17.3.13) Removal
The following steps is a common to the TRAY 2 and the
C H E C K
P O I N T
TRAY 3.
1. Remove the COVER FRONT. (See Section 4.2.20.1.)
2. Remove the COVER R. (See Section 4.2.20.2.)
3. Release the hook securing the GEAR FEED 2 to the PICK UP ASSY
(PL17.3.1), and remove the GEAR FEED 2.
Figure 4-146. GEAR FEED 2 (PL17.3.13) Removal
Disassembly and Assembly
4.2.20.29 STOPPER CLUTCH (PL17.3.16) Removal
C H E C K
P O I N T
1. Remove the COVER FRONT. (See Section 4.2.20.1.)
2. Remove the COVER R. (See Section 4.2.20.2.)
3. Remove the STOPPER CLUTCH while releasing the hook.
HANABI_FDR_CHAP03_029FD
Figure 4-147. STOPPER CLUTCH (PL17.3.16) Removal
Disassembly Assembly Procedures
The following steps is a common to the TRAY 2 and the
TRAY 3.
When installing the STOPPER CLUTCH, combine the top of
the STOPPER CLUTCH (PL17.3.16) to the hook of CLUTCH
ASSY TURN (PL17.3.18) to secure the CLUTCH ASSY TURN.
Revision F
4-440