Epson AcuLaser C4000 Service Manual page 338

EPSON AcuLaser C4000/C4100/C3000
4.2.6.2 HOLDER RETARD (PL3.1.9) Removal
1. Pull out the CASSETTE from the printer body.
2. Remove the CASSETTE ASSY FRONT. (See Section 4.2.6.3.)
3. Remove the ROLL ASSY. (See Section 4.2.6.1.)
4. Pull out the CLUTCH ASSY FRICTION 400 (PL3.1.7) on the SHAFT
RETARD from the CASSETTE.
5. Release the hook of the SPRING RETARD (PL3.1.10) hanging from the
channel of the lower portion of the HOLDER RETARD from the
CASSETTE.
6. Release the 1 hook securing the upper portion of the HOLDER RETARD to
the CASSETTE, and let the HOLDER RETARD shift to the left.
7. After moving the right end of the HOLDER RETARD away from the
CASSETTE toward the front, remove the HOLDER RETARD by pulling it
out.
Figure 4-23. HOLDER RETARD (PL3.1.9) Removal
Disassembly and Assembly
4.2.6.3 CASSETTE ASSY FRONT (REFERENCE ONLY)
1. Pull out the CASSETTE from the printer body.
2. From the right side of the CASSETTE, release the upper and lower section
hooks securing the CHUTE CASSETTE (PL3.1.2) with a tool like a small
screwdriver.
3. From the left side of the CASSETTE, release the upper and lower section
hooks securing the CHUTE CASSETTE with a tool like a small
screwdriver.
4. Pull out the CHUTE CASSETTE along with the HANDLE CASSETTE
(PL3.1.1) from the CASSETTE.
Disassembly Assembly Procedures
Removal
Figure 4-24. CASSETTE ASSY FRONT Removal
Revision F
4-322