Epson AcuLaser C4000 Service Manual page 250

EPSON AcuLaser C4000/C4100/C3000
FIP-49 Verify (DIMM Slot Related) Error
Step
Initial setting:
• Remove all the optional units and modules related to the electrical system and bring the
printer back to the standard status.
1
• Check if all connectors are properly connected to the CONTROLLER PWB.
• Reinsert the DIMM.
Checking the DIMM:
• After formatting the DIMM, load the control program to the DIMM.
• Insert the DIMM in the socket P until it locks securely.
2
NOTE: Since the DIMM has the right direction to insert, be sure to insert it in the correct
direction.
Troubleshooting
Check
Level 2 FIP
Treatment
Yes
Replace or reinstall the relevant
Go to step 2.
part.
Replace or reinstall the relevant
Problem solved.
part.
Revision F
No
3-234