Epson AcuLaser C4000 Service Manual page 445

EPSON AcuLaser C4000/C4100/C3000
4.2.20.15 PICK UP ASSY TR3 (PL17.3.1) Removal
1. Remove the COVER FRONT. (See Section 4.2.20.1.)
2. Remove the COVER R. (See Section 4.2.20.2.)
3. Remove the COVER L. (See Section 4.2.20.3.)
4. Remove the CHUTE ASSY TURN of the TRAY 3. (See Section 4.2.20.4.)
5. Remove the HARNESS ASSY FDR 3T (blue). (See Section 4.2.20.6.)
6. Remove the GUIDE ASSY CASSETTE R. (See Section 4.2.20.11.)
7. Remove the GUIDE ASSY CASSETTE L. (See Section 4.2.20.12.)
8. Remove the LINK ACTUATOR. (See Section 4.2.20.13.)
When disassembling the screws, be careful not to damage
C A U T I O N
the GEAR or SPRING with the screwdriver.
9. Remove the 2 screws (silver, 6mm) securing the PICK UP ASSY TR 3 to
the right side of the FRAME ASSY OPF (PL17.1.3).
10. Shift the PICK UP ASSY TR 3 to right, remove the 2 hooks of the PICK UP
ASSY TR2 and the leading edge of the ROLL ASSY TURN (PL17.3.20)
from the 2 slots in the left side of the FRAME ASSY OPF and the window.
Be careful not the damage rubber components when
C A U T I O N
placing the PICK UP ASSY TR 2 through the window of the
FRAME ASSY OPF.
11. Remove the PICK UP ASSY TR 3 from the right side window part while
being careful to avoid interference with the FRAME ASSY OPF.
Disassembly and Assembly
Figure 4-133. PICK UP ASSY TR3 (PL17.3.1) Removal
Disassembly Assembly Procedures
When assembling the screws, be careful not to damage the
GEAR or SPRING with the screwdriver. Also, be careful not
the damage rubber components when placing the PICK UP
ASSY TR3 through the window of the FRAME ASSY OPF.
Revision F
4-430