Epson AcuLaser C4000 Service Manual page 451

EPSON AcuLaser C4000/C4100/C3000
4.2.20.23 SPRING FEED H (PL17.3.10) Removal
The following steps is a common to the TRAY 2 and the
C H E C K
P O I N T
TRAY 3.
1. Remove the COVER FRONT. (See Section 4.2.20.1.)
2. Remove the COVER R. (See Section 4.2.20.2.)
3. Remove the SPRING FEED H.
Figure 4-141. SPRING FEED H (PL17.3.10) Removal
Disassembly and Assembly
4.2.20.24 SPRING FEED 1 (PL17.3.9) Removal
C H E C K
P O I N T
1. Remove the COVER FRONT. (See Section 4.2.20.1.)
2. Remove the COVER R. (See Section 4.2.20.2.)
3. Remove the SPRING FEED 1.
HANABI_FDR_CHAP03_024FD
Disassembly Assembly Procedures
The following steps is a common to the TRAY 2 and the
TRAY 3.
Figure 4-142. SPRING FEED 1 (PL17.3.9) Removal
Revision F
HANABI_FDR_CHAP03_025FD
4-436