Accessing An Anchor Channel (Anchor Jump); Accessing Adjacent Anchor Channels - Roland M-5000 Quick Start Manual

Accessing an Anchor Channel (Anchor Jump)

1. Press [SCROLL K] and [SCROLL J] at the same time.
Anchor channels registered in the currently selected layer are
shown on the fader display.
2.
Press the [SEL] button that corresponds to the desired
anchor channel.
The fader bank scrolls to the location where the anchor channel is
displayed in the leftmost fader.

Accessing Adjacent Anchor Channels

Pressing and holding the [SCROLL K] or [SCROLL J] button scrolls
forward or backward to the anchor channel nearest the currently
accessed channel.
Overview of Operations
45