Fader View Buttons (Track, Bus, Main, I/O Control) - Roland Sonar V-Studio VS-700 Owner's Manual

FADER VIEW Buttons (TRACK, BUS, MAIN, I/O CONTROL)

You use the [FADER VIEW] buttons to specify what channel type (tracks, buses or mains) is assigned to the channel
strips.
fig.13.eps
The modifier buttons (p. 67) can be used to extend the functions as follows.
Button
TRACK
BUS
MAIN
I/O CONTROL
FLIP
Default function
Assign the channel strips to tracks
Assign the channel strips to buses
Assign the channel strips to mains
Enable control of VS-700R I/O from
rotary encoders
Swap the functions of the rotary
encoder and corresponding fader
(the [ASSIGN] button is disabled in
FLIP mode)
SHIFT+ COMMAND+
Enable/disable Layer
(Reserved)
mode
(Reserved) (Reserved)
(Reserved) (Reserved)
Open the VS-700 property
(Reserved)
page in SONAR
Toggle between
displaying encoder or
(Reserved)
fader values on the LCD
display
CHANNEL STRIP Section
43