To Adjust The Brightness Of The Display; If You're Confused About What's Being Displayed Or What's Going On - Roland V-Mixer VM-C7100 Quick Start Manual

Getting Started

To Adjust the Brightness of the Display

You may wish to adjust the brightness of the display immediately after
power-up, under unusual viewing conditions, or after the unit has been on
for an extended period of time. Adjust the brightness of the screen using the
[CONTRAST] knob on the left bottom of the display.
fig.008
If You're Confused About What's Being
Displayed or What's Going On
If you become confused about what you're seeing on the display, or have
lost your way during some procedure, press [LEVEL METER]. The display
returns to the screen shown immediately after power-up. You can try the
procedure you have been working on again from the beginning.
fig.201
If you find that your system functions differently than described in the
QUICK START or the Owner's Manual, read "Troubleshooting" (Owner's
Manual: p.261) for further information.
If the above steps do not resolve your problem, contact a nearby Roland
Service Center or an authorized Roland distributor, or the shop where you
made your purchase.
12
LEVEL METER