Table of Contents
Advertisement
1B3-114 OM600 ENGINE MECHANICAL
Replacement Procedure
1. Remove the valve tappet (1) with magnetic lifter.
Notice
Place the valve tappets upside down (open end upward).
2. Install the holding wheel (7) into the timing chain (11).
3. Position the piston of relevant cylinder at TDC.
4. Install the supporting bar (8).
5. Using press lever (9), press the spring retainer(3) downward
and remove the valve collets with magnetic finger (10).
Magnetic Lifter 102 589 03 40 00
Holding Wheel 603 589 01 40 00
Supporting Bar 667 589 02 63 00
Press Lever 667 589 00 31 00
Magnetic Finger 116 589 06 63 00
Advertisement
Chapters
Table of Contents
