Installing A Replacement Chassis In The Equipment Rack; Packing A Chassis For Shipment - Cisco ASR 9000 Series Installation Manual

Chapter 5 Replacing Cisco ASR 9000 Series Router Components

Installing a Replacement Chassis in the Equipment Rack

Follow these steps to install the replacement chassis and components in the equipment rack:
Step 1 Install the new chassis in the rack (see the
Step 2 Install the power modules (see the
page
Install the fan tray (see the
Step 3
Step 4 Install RSP, RP, FC and line cards in the chassis (see the
Chassis" section on page
Install the chassis air filter (see the
Step 5
Connect all line card and interface cables (see the
Step 6
section on page
Connect the supplemental bonding and grounding connection (if there is one) to the chassis (see the
Step 7
"Supplemental Bonding and Grounding Connections" section on page
Connect power to the power trays on the rear of the chassis.
Step 8
•
•
To turn on power to the router, see the
Step 9

Packing a Chassis for Shipment

Use the packaging that came with the replacement chassis to repack and ship the chassis being replaced.
Before shipping the chassis being replaced, pack the chassis back into the shipping rack. Refer to the
"Unpacking the Router" section on page
5-11).
"Removing and Replacing the Fan Trays" section on page
5-24).
3-17).
For AC power modules, see the
For DC power modules, see the
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Installing a Replacement Chassis in the Equipment Rack
"Rack-Mounting the Router Chassis" section on page
"Removing and Replacing Power System Components" section on
"Removing and Replacing Cards from the
"Replacing the Chassis Air Filter" section on page
"Connecting Line Card Network Interface Cables"
"Reconnecting AC Power" section on page
"Reconnecting DC Power" section on page
"Powering On the Router" section on page
2-3.
5-10).
5-4).
2-55).
5-16.
5-19.
3-31.
5-27
2-41).