Unpacking The Cisco Asr 9912 Router - Cisco ASR 9000 Series Installation Manual

Chapter 2 Unpacking and Installing the Chassis

Unpacking the Cisco ASR 9912 Router

Follow these steps to unpack the Cisco ASR 9912 Router from its wooden shipping container.
Remove any strapping on the outside of the crate.
Step 1
Remove the crate cap door. Disengage the twist locks located along the bottom first. Then, disengage the
Step 2
twist locks located along the sides, working your way up from the bottom to the top. Refer to the right
and middle figures in
Remove the crate cap. Disengage the twist locks located around the bottom of the crate cap (see
Step 3
Figure
Note
Remove the foam packaging material from the top of the router.
Step 4
Figure 2-9 Unpacking the Cisco ASR 9912 Router from the Shipping Container
Using a 5/16" wrench or ratchet, remove the four attachment bolts and cross-brace from the shipping
Step 5
rack (see
Figure 2-9.
2-9).
Two people are required to evenly slide the crate cap back off of the plastic pallet base.
Figure 2-10).
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Unpacking the Router
2-13