Installing Base Chassis Accessories On The Cisco Asr 9006 Router - Cisco ASR 9000 Series Installation Manual

Installing Chassis Accessories

Installing Base Chassis Accessories on the Cisco ASR 9006 Router

The base chassis accessories for the Cisco ASR 9006 Router include:
•
•
•
•
•
•
•
If you ordered the optional accessories set, see the
Note
Cisco ASR 9006 Router" section on page 2-71
If you did not order the optional accessory set, follow these steps to install the supplied base chassis
accessories on the Cisco ASR 9006 Router.
Attach the plastic accessory piece to the fan tray door using two supplied screws. Insert the screws
Step 1
through the fan tray door from the inside of the door into the accessory piece (see
Attach the left metal mounting bracket to the front upper left corner of the chassis with three screws.
Step 2
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
2-68
One plastic fan tray door accessory piece
Two metal mounting brackets (left and right)
Two chassis side brackets (left and right)
Two plastic chassis corner pieces (left and right)
Two screws for attaching the plastic fan tray door accessory piece
Six screws for attaching the metal mounting brackets
Six screws for attaching the side brackets
Chapter 2 Unpacking and Installing the Chassis
"Installing Optional Chassis Accessories on the
to install both the base and optional accessories.
Figure 2-57).