Cisco ASR 9000 Series Installation Manual page 275

Appendix A Technical Specifications
Table A-20
Table A-20
Parameter
Voltage
Maximum
Nominal
Minimum
Power
Minimum (one power module)
Maximum (four 2100 W power modules in a single tray)
Maximum (four 2100 W power modules per tray x two
trays)
Maximum (four 2100 W power modules per tray x four
trays)
1. Maximum output power the power system is capable of supporting (not system power consumption).
Table A-21
Table A-21
Description
Console port
Auxiliary port
Management ports (0, 1)
Sync ports (0, 1)
lists the DC output tolerances for AC or DC power modules for the version 2 power system.
DC Output Levels for Version 2 Power System
lists the RSP/RP port specifications.
RSP/RP Port Specifications
Value
EIA/TIA-232 RJ-45 interface, 9600 Baud, 8 data, no parity, 2 stop bits with
flow control none (default)
EIA/TIA-232 RJ-45 interface, 9600 Baud, 8 data, no parity, 1 stop bit with
software handshake (default)
Dual-speed (100M/1000M) RJ-45
Can be configured as one of the following:
BITS (Building Integrated Timing System) port
•
• J.211 or UTI (Universal Timing Interface) port
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Value
–55.5 VDC
–54.0 VDC
–52.5 VDC
2100 W
1
8400 W (Cisco ASR 9006 Router and
Cisco ASR 9904 Router)
16,800 W (Cisco ASR 9010 Router only)
33,600 W (Cisco ASR 9922 Router only)
A-13