Field Replaceable Units; Prerequisites And Preparation - Cisco ASR 9000 Series Installation Manual

Prerequisites and Preparation

Field Replaceable Units

In the Cisco ASR 9010 Router, Cisco ASR 9006 Router, and Cisco ASR 9904 Router the following
components are field replaceable units (FRU):
•
•
•
•
•
•
•
•
•
•
•
•
The backplane and version 1 power trays are not field-replaceable.
Note
In the Cisco ASR 9922 Router and Cisco ASR 9912 Router, the following components are FRUs:
•
•
•
•
•
•
•
•
•
•
•
•
The backplanes and BPID cards are not FRUs but are field serviceable.
Note
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
5-2
All line cards
RSP cards
Power modules
Power trays (version 2 power trays only). Note that the router must be powered down before power
tray removal.
Fan trays
Air filters
Line card and RSP blank fillers
Compact flash disk
Gigabit Ethernet small form-factor pluggable (SFP) transceiver modules
10-Gigabit Ethernet small form-factor pluggable (SFP+) transceiver modules
10-Gigabit Ethernet small form-factor pluggable (XFP) transceiver modules
Optional card cage doors (Cisco ASR 9010 Router only)
All line cards
RP cards
FC cards
Power modules
Power trays
The Cisco ASR 9904 Router, Cisco ASR 9922 Router and Cisco ASR 9912 Router use only
–
version 2 power trays.
– The Cisco ASR 9000 Series Routers must be powered down before power tray removal.
Fan trays and covers
Air filters and foam media
Blank line card fillers
Gigabit Ethernet small form-factor pluggable (SFP) transceiver modules
10-Gigabit Ethernet small form-factor pluggable (SFP+) transceiver modules
100-Gigabit Ethernet small form-factor pluggable (CFP) transceiver modules
Optional card cage doors
Chapter 5 Replacing Cisco ASR 9000 Series Router Components