Cisco ASR 9000 Series Installation Manual page 89

Chapter 2 Unpacking and Installing the Chassis
Use a Phillips screwdriver to unscrew the rear mounting flange from the system and rack.
Step 6
Use a Phillips screwdriver to unscrew the front mounting flange from the rack.
Step 7
Remove two bolts per hold-down bracket that secure the brackets to the pallet (see
Step 8
Figure 2-11
Note
Save the rear brackets and screws from the shipping packaging for reuse in rack mounting of the chassis
Step 9
(see Figure
Note
Hold-Down Brackets on the Cisco ASR 9912 Router Shipping Pallet
Do not unbolt the shipping rack from the pallet.
2-12).
The two guide rails at the bottom of the rack come in the ASR-9912-ACC-KIT accessory kit.
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Unpacking the Router
Figure 2-11).
2-15