Installing Chassis Accessories; Base Accessories; Optional Accessories - Cisco ASR 9000 Series Installation Manual

Installing Chassis Accessories

Installing Chassis Accessories

Base Accessories

The Cisco ASR 9000 Series Routers ship with a base set of chassis accessories. To install the base
chassis accessories, see the appropriate installation procedure below for your router:
•
•
•
The Cisco ASR 9904 Router does not include base chassis accessories.
Note

Optional Accessories

•
•
•
•
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
2-60
For the Cisco ASR 9010 Router, see the
Cisco ASR 9010 Router" section on page
strips, and one accessory grill.
For the Cisco ASR 9006 Router, see the
9006 Router" section on page
Base accessories include one plastic fan tray door accessory piece, two metal mounting brackets
(left and right), two chassis side brackets (left and right), two plastic chassis corner pieces (left and
right), two screws for attaching the plastic fan tray door accessory piece, six screws for attaching
the metal mounting brackets, and six screws for attaching the side brackets.
For the Cisco ASR 9912 Router, see the
Cisco ASR 9912 Router" section on page
cover and one vented bezel to cover the front of the power system.
For the Cisco ASR 9010 Router, see the
Cisco ASR 9010 Router" section on page
Optional accessories include six ball studs, two L-shaped brackets, two hinge brackets (left and right
side), eight screws (plus one extra) for attaching the hinge brackets, four screws for attaching the
L-shaped brackets, two doors (left and right side), and one mid-cover with door lock.
For the Cisco ASR 9006 Router, see the
Cisco ASR 9006 Router" section on page 2-71
Cisco ASR 9006 Router" section on page
Optional accessories include four ball stud assembly pieces (one set of two pieces per side), one door
with attached hinges, four screws for assembling and attaching the ball stud assemblies, and four
small hex nuts for attaching the door hinges.
An optional air baffle accessory kit is available for mounting the router in a 2-post or 4-post 19-inch
rack.
For the Cisco ASR 9904 Router, see the
Cisco ASR 9904 Router" section on page
An optional air baffle accessory kit is available for mounting the router in a 2-post 23-inch rack.
For the Cisco ASR 9922 Router, see the
Cisco ASR 9922 Router" section on page
Optional accessories include fan tray covers, top and bottom card cage front doors, and rear exhaust
air deflector.
"Installing Base Chassis Accessories on the
2-61. Base accessories include two ball studs, two plastic
"Installing Base Chassis Accessories on the Cisco ASR
2-68.
"Installing Base Chassis Accessories on the
2-92. Base accessories include one honeycomb cosmetic
"Installing Optional Chassis Accessories on the
2-63.
"Installing Optional Chassis Accessories on the
and the "Installing Optional Air Baffles on the
2-74.
"Installing Optional Air Baffles on the
2-81.
"Installing Optional Chassis Accessories on the
2-90.
Chapter 2 Unpacking and Installing the Chassis