Obtaining Temperature And Environmental Information - Cisco ASR 9000 Series Installation Manual

Chapter 4 Troubleshooting the Installation
Table 4-3
Hardware ID
PS2 M2
PS2 M3
PS3 M0
PS3 M1
PS3 M2
PS3 M3

Obtaining Temperature and Environmental Information

If both the RSP/RP and fan trays are operating, all internal correct DC voltages are present.
Enter the show environment command at the router admin prompt to display temperature and voltage
information for each installed card, fan tray, and power module as shown in this example:
RP/0/RSP0/CPU0:router(admin) #show environment
Temperature Information
---------------------------------------------
R/S/I
0/RSP0/*
0/0/*
0/1/*
0/FT0/*
0/FT1/*
Voltage Information
---------------------------------------------
R/S/I
0/RSP0/*
Power Module Hardware and Software IDs (continued)
Modules Inlet
Temperature
(deg C)
host 25.3
host 29.2
host 35.0
host 21.2
host 22.0
Modules Sensor
host 0.75VTT
host 0.9VTT_A
host 0.9VTT_B
host IBV
host 5.0V
host VP3P3_CAN
host 3.3V
host 2.5V
host 1.8VB
host 1.2VA
host 1.2VB
host 1.05V
host 1.2VD
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
Troubleshooting the Power Subsystem
Software ID
PM10
PM11
PM12
PM13
PM14
PM15
Hotspot
Temperature
(deg C)
41.6
30.0
46.6
20.8
21.5
(mV) Margin
749 n/a
909 n/a
900 n/a
10484 n/a
4998 n/a
3283 n/a
3297 n/a
2496 n/a
1798 n/a
1204 n/a
1204 n/a
1051 n/a
1206 n/a
4-13