Connecting Cables to the RSP or RP
Connecting Cables to the RSP or RP
This section describes how to connect cables to the console, auxiliary, and Ethernet ports on the RSP/RP.
The console and auxiliary ports are both asynchronous serial ports; any devices connected to these ports
must be capable of asynchronous transmission. For example, most modems are asynchronous devices.
Figure 3-16
Figure 3-16
1 Console terminal
2 Modem
Figure 3-17
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
3-22
shows an example of an RSP with data terminal and modem connections called out.
RSP Console and Auxiliary Port Connections
1
2
shows an example of an RP with data terminal and modem connections called out.
Chapter 3
3
3 RJ-45 Ethernet cables
4 Console port
Installing Cards and Modules in the Chassis
4
5
5
Auxiliary (AUX) port