Pre-Installation Considerations And Requirements; Unpacking And Installing The Chassis - Cisco ASR 9000 Series Installation Manual

Unpacking and Installing the Chassis

This chapter describes how to unpack and install the chassis into a rack.
•
•
•
•
•
•
•
•

Pre-Installation Considerations and Requirements

Before you perform any procedures in this chapter, review the following sections:
•
•
Observe the guidelines for preventing electrostatic discharge (ESD) damage described in the
Electrostatic Discharge Damage" section on page
Refer to the
document for additional safety and compliance information,
This router is not designed to be installed as a shelf-mounted or a free-standing router. The router must
Caution
be installed in a rack that is secured to the building structure. You must install the router in either a
telco-style frame or a 4-post equipment rack.
Pre-Installation Considerations and Requirements, page 2-1
Installation Overview, page 2-2
Unpacking the Router, page 2-3
Removing Components Before Installing the Chassis, page 2-18
Removing Cards from the Chassis, page 2-26
Rack-Mounting the Router Chassis, page 2-41
Supplemental Bonding and Grounding Connections, page 2-55
Installing Chassis Accessories, page 2-60
Safety Guidelines, page 1-1
Site Requirement Guidelines, page 1-8
Regulatory Compliance and Safety Information for the Cisco ASR 9000 Series Router
Cisco ASR 9000 Series Aggregation Services Router Hardware Installation Guide
C H A P T E R
1-2.
2
"Preventing
2-1